Water!

Installing the liner for the aquaponics raft tank! The pond liner is super heavy and not easy to work with, learning to fold the corners was pretty difficult.  When installing your liner be patient and take your time! 


 
The liner should be pulled tight over the frame, but loose enough to account for future weight of the water.   


I used a food safe pond liner, but next time I will use a white vinyl liner, it is quickly becoming the industry standard.  Lighter weight and food safe the liner is the better choice, although more expensive.

Wrapping the liner around the frame I attached it with roofing nails with the plastic ring to help disperse the tension on the nails, this will help keep the liner from ripping.

“Must make it SssmoOOOoooth”

 

5 thoughts on “Water!

  1. That is going to be one fantastic setup when its up and running!

    I’m also in the beginning build stage of doing a AP Greenhouse so getting inspiration from like minds is always a treat!

    It’ll be neat to see your system once you’ve got it started cycling ;)

  2. I have been following your posts and wanted to comment on the great good with projects and your website. You provide good information to your readers thanks.

    I have linked you from my website.

  3. Hi. I would like to ask you, did you put anything between the wire and the liner? Is there anything that protect the liner from been against the wire? It do not look clear in any pictures :(